재다 - 셀프 인테리어 자재 계산 도구

Gypsum Board Quantity Calculator

*
*
%
Is there an area to deduct?

Please check.

  • Gypsum boards are typically 3x6 (900x1800] in size, and the thickness (9.5T, 12.5T] must be determined first according to the installation area to calculate the exact quantity.
  • When finishing both sides of a partition wall, you must prepare double the calculated quantity, and it is standard practice on site to add a surcharge of 5 to 10 percent of the total quantity to account for cutting losses.
  • Stud spacing is typically designed at 450mm, but in commercial spaces or when finishing materials are heavy, they must be spaced closely at 300mm intervals to ensure the structural safety of the wall.
  • Exclude the area of ​​doors or windows from the total, but ordering one or two extra studs and runners for reinforcement work around openings is a tip to prevent construction from stopping.
  • If the ceiling height is high, use 3x8 (2400mm] boards to reduce seams. The fewer the joints, the higher the quality of the putty and paint finishes and the more you can prevent defects.

How about this calculator?

Gypsum Board Quantity Calculator, Material Calculation for Partition Wall & Ceiling Construction (Supports 1P/2P/Double-sided]

How many sheets of drywall do I need to build a partition wall? Drywall is the most basic material in interior design and carpentry work. If you directly input the size of the wall to be constructed and the specifications (width/height] of the drywall you intend to use, this calculator automatically calculates the exact quantity required, taking into account the number of layers and markup rates.

Gypsum board quantity calculation formula

Please check the wall dimensions and material specifications in millimeters to calculate the exact quantities.

1. Partition wall width, height

Enter the total width and height of the wall (or ceiling] to be constructed in mm.

2. Directly enter drywall specifications

Directly enter the width and length of the drywall sheet to be used. Please set it according to site specifications, such as 3x6 (900x1800], 3x8 (900x2400], or 4x8 (1200x2400].

3. Number of layers of construction

Select how many layers of drywall to install. Wallpaper finishes usually require 1 layer (1P], while paint or silk wallpaper finishes require 2 layers (2P].

4. Surcharge Rate and Deduction Area

Accuracy is improved by excluding leftover waste (5–10% recommended] and the area of ​​spaces where boards cannot be attached, such as doors and windows.

Detailed Guide to Calculator Input Items

Calculate by multiplying the total number of layers based on the area of ​​one input board.

Formula for calculating total required quantity
Required Quantity (sheets] = {(Wall Width × Wall Height] - Deducted Area (㎡]} ÷ (Gypsum Board Width × Gypsum Board Length] × Number of Layers Installed × (1 + Markup Rate]

Example: When installing 2 layers (2P] of 900x1800 (1.62㎡] standard boards on a 10㎡ wall, it is recommended to order approximately 14 sheets, including waste.

Gypsum board standard specifications reference table

Title (person] Width (mm] Vertical (mm] Area (㎡] characteristic
3 x 6 900 1,800 1.62 Domestic standard, easy to load into elevators
3 x 8 900 2,400 2.16 For high-ceilinged house walls
4 x 8 1,200 2,400 2.88 Save labor costs on large-scale construction

Expert Know-how and Checklists

This is the key point of foundation work that determines the quality of the finish.

  • 1P (One-piece] vs 2P (Two-piece] Installation Difference

    1P is recommended for laminated wallpaper finishes as the seams may be susceptible to impact. 2P features excellent durability due to the staggered bonding of boards and is essential for paint or silk wallpaper finishes.

  • Verify material specifications and transportation routes

    3x6 size items can usually be loaded onto elevators, but for 4x8 size items, a ladder truck may be required if a freight elevator is not available. Please determine the input size based on the site conditions.

  • Precautions for Installing Double-Sided Partition Walls

    If you need to cover both sides of the frame with a partition wall, you must double the calculated quantity. For double-sided 2P installation, a total of 4 layers are required.

Frequently Asked Questions (FAQ]

  • Q. Can I mix in leftover boards that differ from the entered specifications?
  • A. Yes, it is possible. However, please calculate the quantity based on the standard size of a single sheet for the main use, and utilize the scraps for narrow areas such as around windows.
  • Q. What is the markup rate for ceiling (denjo] installation?
  • A. Ceilings incur more waste than walls due to the installation of lighting holes and inspection hatches. It is recommended to allow a generous markup rate of around 10–15%.
  • Q. What is used to fix drywall?
  • A. 422 staple pins and wood glue are used in combination on the wooden frame, and magazine pieces (screws] are used to secure it on the lightweight steel frame (stud].